 Silver Sparkle Ornament
Level: Easy
Materials
DAZZLE-TAC JEWELRY GLUE
GEM-TAC GLUE
• 4” clear glass ball
• Silver or holographic fine glitter
• White & silver cording
• Sheer silver ribbon, ¾” wide
• Rhinestone snowflakes and buttons, shanks removed
• Scissors, small funnel for glitter
|
|
| Instructions: |
| 1. |
Remove top from the ornament and rinse inside well. Mix about a teaspoon of GEM-TAC with a few drops of water to thin the glue. Pour into glass ball. Put thumb over the opening and shake to coat all the sides of the ornament. If the inside of the ball is not completely covered, add a bit more glue until well coated. |
| 2. |
Turn ball upside down over an empty foam or paper coffee cup to drain of excess glue. After it stops dripping (a minute or so), turn ball upright and place the small funnel into the opening. Sprinkle about ½ tsp glitter into the ball. Shake until the inside is completely covered. Let ball sit for at least an hour. If there are any bare spots, repeat with the glue and glitter until completed coated. Replace ornament top. |
| 3. |
Apply a thin bead of DAZZLE-TAC around the ornament and gently place the sheer silver ribbon over the glue. Continue around the ornament at least three times and let dry. |
| 4. |
Apply another thin bead of DAZZLE-TAC around the ornament over the ribbons and press silver cord onto the glue line. Continue until you’ve wrapped the cord around the ornament five times, ending at the top. Hide cord end by gluing it under the wrapped area. |
| 5. |
Add rhinestone snowflakes and buttons in a random pattern over the ball with DAZZLE-TAC and let dry. |
|
|
| Designer: Sandy Rollinger |
|
BEACON ADHESIVES, Inc., 125 MacQuesten Parkway South, Mount Vernon, NY 10550, Tel: (914) 699-3405
E-mail: Crafts4@BeaconAdhesives.com
Beacon is not responsible for the manner in which our products are used and,
therefore, cannot guarantee results. Beacon's liability is limited to product replacement.
|
